The Globe Valves are primarily used to modulate or regulate the volume of the flow.A Globe Valve is not recommended when a continuous full flow of fluid is required due to the high pressure drop inherent to the design of a Globe Valve. This type of valve should always be installed such that flow intake enters through the base of the valve seat.
Check valves are generally used to protect pumps or similar equipment, allowing the flow only in one direction & preventing flow reversal due to back pressure. Metal seated check valves not provide drop tight sealing when used in gas system or fluid system with low back flow pressure.
Design Std. : API 602 I BS EN ISO 15761
Testing Std. : API 598
Outside screw and yoke type bolted bonnet construction
Body and bonnet made from quality forgings.
Easy access to stuffing box.
Self-aligning gland and follower.
Accurately machined gate/plug and seating surfaces to assure leak tightness.
Streamlined flow passages to minimise pressure losses and erosion.
Back seating arrangement provided to bonnet.
Design Std. : API 602 I BS EN ISO 15761
Testing Std. : API 598
Uniquely designed piston lift check valve incorporating self cushioning effect.
Taper Plug type disc and shoulder seated renewable seat ring for positive Seating and leak tightness.
Guided piston assuring accurate return to seat ring to achieve leak tightness.
Streamlined flow passages designed to minimize pressure losses and erosion.Long cycle life of bellow (Min. 10,000 Cycles)
| Design Standard | API 602 I BS EN ISO 15761 |
| Testing Standard | API598 |
| Face to Face Dimensions | Manufacturer Std |
| End Connection | Socket end, Screwed end |
| Material | ASTM A105 / ASTM A182 Gr.F304 / F316 |
| #800 | DN 40 up to DN 800 |
Valves can also be offered with IBR certification.